Short Reed Goose Call Guts SR-1 $3.75/set
These short reed call guts are top quality and work very well. The set includes the soundboard, wedge, and reed. These guts are made to fit a .625" bored keg and are one of WEBFoot's best selling guts.
SR-1 Replacement Reeds: 15 reeds for $11.25 - 100 for $70.00 - or 200 reeds for $126.00
Short Reed Goose Call Guts SR-2 $3.50/set
These short reed call guts are top quality and work very well. The set includes the soundboard, wedge, and reed blank. These guts are made to fit a .618" - .622" bored keg, which is the same as the Clucker guts from K&H. The reed blank is supplied so you can cut your own desired shape (pictured reed has been contoured by the manufacturer for demo purposes only.)
SR-2 Replacement Reed Blanks: 15 reeds for $4.00 - 100 for $25.00 - or 200 reeds for $45.00
Flute Goose Call Guts GF-1 $3.75/set
These flute style call guts are top quality and work very well in most any flute application. The set includes the soundboard, wedge, and reed. These guts are designed to fit a .625" bore.
GF-1 Replacement Reeds: 15 reeds for $11.25 - 100 for $70.00 - or 200 reeds for $126.00
:
Double Reed Duck Call Exhaust Tube (Keg) DRE - 1 $3.50 ea.
This part is the same as the goose exhaust tube, and saves you the work of having to bore the hole for the duck guts and making the exhaust side of the call. All you need to do is build the barrel to proper dimensions to fit the exhaust tube and you're ready to go. This keg will fit the D-1 and D-3, though specifically made for, and by the maker of the D-1. Dimensions: Small end OD - ..810" Large End OD - .875" Overall Length - 2.00" Gut Bore ID - .500"
WEBFoot Goose Reeds - WCGR - 1
The WEBFoot WCG-1 Goose Call reed is similar to the K&H style short reed goose call reed, but approximately .100" longer. .014" Mylar "A"
15 reeds for $10.00 - 100 for $60.00 - or 200 reeds for $100.00
WEBFoot Duck Reeds - WCDR - 1
The WEBFoot WCD-1 Duck Call reed is a standard single reed style that is similar to most single reed call reeds with the dog eared tip, .575" wide and is approximately 1.5" long. .010" Mylar "A"
15 reeds for $10.00 - 100 for $60.00 - or 200 reeds for $100.00
Short Reed Goose Call Guts SR-3 $4.00/set
These short reed call guts are top quality and work very well. The set includes the soundboard, wedge, and reed. These guts are a replica of the K&H guts with s lightly larger tone channel, are molded with higher quality plastics and the Mylar used for making the reed is also of higher quality, resulting in a super sounding and longer lasting call. SR-3 guts fit a .618" to .623" bore.
SR-3 Replacement Reeds: 15 reeds for $15.00 - 100 for $70.00 - or 200 reeds for $160.00
Short Reed Goose Call Guts SR-4 $3.50/set
These guts are extremely loud and will produce all true Canada sounds that any other short reed set of guts will produce. With a little work and thought, these guts will even produce a speck and snow goose. As for Canada sounds the crisp clucks all the way to low moans are easy to perform. This set of inserts take very little air or can be made to take more air by making the ID bore size smaller. The inserts come ready to fit a bore size range of .617" to .623". May be Brown or Black
SR-4 Replacement Reeds: 15 reeds for $12.00 - 100 for $70.00 - or 200 reeds for $130.00
Double Reed Duck Call Guts D-3 $3.50/set
These double reed duck guts fit a .500" bore and fits the Double Reed Exhaust Kegs. The reeds are punched out but still require the dimple. Reeds may be different that those pictured depending on type received from supplier.
D-3 Replacement Reeds: 15 reeds for $12.00 - 100 for $75.00 - or 200 reeds for $130.00
Single Reed Duck Call Guts DS-1 $3.50/piece
These single reed duck call guts are an Arkansas style, J-Frame call gut. These guts come with an extra long reed (the WEBFoot WCDR-1) and a piece of cork, both of which will need trimmed to meet your needs (the cork supplied MAY BE TOO THICK and may require filing or sanding to fit, this is done to allow you to customize how all the pieces fit. Some like tight cork others like loose cork.) Improper fitting of the cork may damage the guts beyond repair. These guts are designed to fit a .625" bore or the DS Exhaust Keg, and seal with an o-ring or glue (not included).
DS-1 (WCDR-1) Replacement Reeds: 15 reeds for $10.00 - 100 for $60.00 - or 200 reeds for $100.00
Guts without reed or cork (WCDR-1-NRC): $2.50 per piece
Replacement Cork Pieces: 5 for $2.50 - 100 for $45.00 - or 200 for $85.00
WEBFoot Glue-in "Gut-sert" - WCO-xxx .500" & .625" $4.00 each .619" $4.50 each
The WEBFoot Glue-in "Gut-sert" is a machined plastic bushing that is used for making goose calls from wood, in cases where the wood is not strong enough to hold the guts without splitting. "Gut-serts" are to ~ .865" OD on the large end, with two o-rings, and .740" OD on the small end for the goose call gut-sert and ~.745" OD on the large end, with two o-rings, and .625" OD on the small end for the duck call gut-sert. They are available with two different bore diameters for the two common sizes of molded call guts; .625" and .500". Colors and styles vary, with gray and black being most common. Recommended glues: Fletch-Tite, Flex-Fletch, Gorilla Glue. The .625" gutserts will work with some of the smaller guts, but some do require a bit of scotch tape on the wedge or a little ingenuity. The new .619" ID Gutsert has a bit shorter glue in section, but still has the same exterior diameter dimensions and works with many of the popular sub-5/8 guts.
Current Stock:
WCO625" $4.00 ea (top picture)
WCO619" ID $4.50 ea (bottom picture)
WCO500" ID $4.00 ea
Short Reed Goose Call Guts SR-6 $4.50/set
These guts are machined from Delrin/Acetyl. The inserts come ready to fit a bore size range of .617" to .628" (did he say they would fit a 5/8 bore? yes I did - they do fit a 5/8 bore) - so they are good to go with most call style designs..
SR-6 Replacement Reeds: 15 reeds for $12.00 - 100 for $70.00 - or 200 reeds for $130.00
Short Reed Goose Call Guts SR-7
$4.50 / set
These guts are molded, and have reed locating tangs - which would be considered 'self-tuning'. The inserts come ready to fit a bore size range of .617" to .620" - which is the smaller of the current two goose call gut size standards. This gut may just challenge the top selling SR1 - at least for all you sub 5/8 bore sized call makers.
SR-7 Replacement Reeds: 15 reeds for $12.00 - 100 for $70.00 - or 200 reeds for $130.00
Double Reed Duck Call Guts D-2 $3.75/set
These double reed duck guts fit a .500" bore and fit the Double Reed Exhaust Keg. The reeds are punched out but still require the dimple, and are a bit long to accommodate trimming and tuning to your preference.
D-2 Replacement Reeds: 15 reeds for $12.00 - 100 for $75.00 - or 200 reeds for $130.00
Arkansas Style Duck Keg: ARK-1
$6.50 each
This is a molded one piece Arkansas style duck call keg. It is well regarded in the call making community for the sound it produces. Some various colors are available, but require a minimum order. The keg will come with a piece of cork to cut to your liking and one WCDR-1 reed to tune your insert as you see fit. The reed and cork is not 'pre tuned'.
ARK-1 (WCDR-1) Replacement Reeds: 15 reeds for $10.00 - 100 for $60.00 - or 200 reeds for $100.00
Insert without reed or cork (WCDR-1-NRC): $5.75 per piece
Replacement Cork Pieces: 5 for $5.00 - 100 for $95.00 - or 200 for $185.00 - NOTE THIS CORK DOES NOT FIT ANYTHING BUT THE ARK-1 and DS-1.
WEBFoot "Gut-sleeve" - WCO-1 $X.00 each
The NEW WEBFoot Glue-in "Gut-sleeve" is a machined aluminum bushing that is used for making goose calls from wood, in instances where the wood is not strong enough to hold the guts without splitting. "Gut-sleeves" are .685" OD x .500" long and are available in two bore diameters: .625" and .619". These are machined in limited batches and may require extra time to fill your order - depending on inventory levels
Current Stock:
.625" ID
.619" ID
Single Reed Duck Call Exhaust Tube (bell) $1.85 ea.
This part is the same as the goose exhaust tube and double reed call keg in function, but has different measurements to fit the DS-1 single reed J-frame guts, all you need is either a little glue or an o-ring (not included). This set up not only saves you the work of having to bore the hole for the duck guts and making the exhaust side of the call, but coupled with the DS-1 gives you an Arkansas style call with out the hassle of reinforcing the keg or worrying about spiting the wood. All you need to do is build the barrel to proper dimensions to fit the exhaust tube and you're ready to go. Dimensions: Small end OD - " Large End OD - " Overall Length - " Gut Bore ID - .625"
Brass Bands
Polished Brass bands. Outside diameter 1.25" with a .040" wall thickness. I recommend a .001" to .003" interference fit.
Currently only available in brass.
Item #: BRBD125-01 Brass Band Individual: $1.50
Item #: BRBD125-10 Brass Band - Ten Pack: $14.00
Special orders for larger quantities available, email us for details.
05/06/2008 11:37:27 PM.
Black - Draw String Call bags Micromesh
These call bags are Black micromesh material with a single draw string. Perfect for most duck and short reed goose calls. Dimensions are approximately 3.5"W x 6.5"L. Available singly or by the dozen.
The only color currently available is Black..
Item #: BCB-01 Black call Bag - 1ea. $0.75
Item #: BCB-12 Black call Bag - 1dz. $8.00
Special orders for larger quantities available, email us for details.
Please Note:
Some pricing has recently changed due to rising oil costs. And honestly, I expect more of my vendors to raise their prices at some point this year.
* Returns or exchanges are NOT accepted on molded call guts, custom tools, or tools that have been used.