* Prices vary by size, custom sizes are generally more.
Crush Lok System:
#2 MT - .625” holder - .625” bore - w/o Recessed Cuts
$60.00
#2 Morse Taper Type shown. Standard mandrel rod sizes available: .500” (1/2), .5625 (9/16), .625” (5/8), and .6875” (11/16). Custom sizes are available, contact me for more information and pricing. Below surface cuts are available for total call sanding access. Works almost all duck and goose call blanks, wall thickness. (Call must have rough ends to avoid damage to the finished call.) A little less versatile than the MVS.
|
.500” |
.5625” |
.625” |
|
$45.00 |
$45.00 |
$40.00 |
Replacement/Interchangeable
Mandrel Rods
Crush Style Only (w/ mount same or smaller than mandrel diameter.)
The C.L.S. Mandrel operates on a compression basis. The wood blank is compressed or squeezed between the mandrel holder and the the crush sleeve and jam-nuts. The holding force is completely on the ends of the call. This is the strongest way to mount your call blank for heavy material removal, but you loose some of the finer finishing aspects by only using this method. Please refer to the MVS Page to download the instruction sheets in MS Word format.
07/04/2008 12:36:10 PM