#2 Morse Taper Type shown. Standard mandrel rod sizes available: .500” (1/2), .5625 (9/16), and .625” (5/8). Custom sizes are available, contact me for more information and pricing. Below surface cuts are available for total call sanding access. Easily works almost all duck and goose call blanks, wall thickness, and is the most versatile. Crush style mandrels require the blank to be at least 1/2" longer than the finished call. Schematic is shown without recessed cuts.
The MVS consists of six pieces: the holder with a #2 Morse Taper mount, the mandrel rod, the pin for the pin lock, two nuts (1/2” X 13 TPI or 1/2" x 20 TPI), and a washer/sleeve. Using these six pieces in various configurations will allow you to do several operations with one simple tool.
|
.500” |
.5625” |
.625” |
|
$50.00 |
$50.00 |
$45.00 |
Replacement/Interchangeable Mandrel Rods
MVS (Crush/PinLok) Style
(w/ mount same or smaller than mandrel diameter.)
* Picture is shown with additional Recessed Cuts
Most Versatile System:
#2 MT - .625" holder - .625” bore w/o recessed cuts
$70.00
* Prices vary by size, custom sizes are generally more.
07/22/2008 10:39:29 AM