Beall Collet Chuck - 1" x 8 tpi

Beall Collet Chuck - 1" x 8 tpi
Beall Collet Chuck - 1" x 8 tpi Beall Collet Chuck - 1" x 8 tpi Beall Collet Chuck - 1" x 8 tpi
Price: $75.00

Available Options

* Kit Options:

Qty:   Out of Stock
   - OR -   

This collet chuck body is made in the USA!

BE SURE TO READ THE ASSEMBLY INSTRUCTIONS! (click here)  Improperly installing the collet can ruin the collet, and/or cause excessive wear on the chuck body and nut.  You must install the collet into the NUT FIRST, then install that assembly into the chuck body - leaving the nut loose, then put the item to be held into the collet, then tighten the collet nut.

This Collet Chuck fits 1" x 8 tpi threaded spindles and utilizes standard ER32 collets.  (Choose whether you want a Kit with collets or Chuck Only above prior to adding to your cart.)

- The Chuck with Collets includes (shown in pictures):  Collet chuck body, collet nut, ONE adjustable Spanner wrench (a revision made by the manufacturer in early 2020), instruction sheet, 5 collets (1/4", 3/8", 1/2", 5/8", and 3/4" - collets are imported) and box.

- The Chuck Only includes:  Collet chuck body, collet nut, ONE adjustable Spanner wrench (a revision made by the manufacturer in early 2020), and instruction sheet - NO collets are included with the Chuck Only - and may or may not come with a box.  (Individual collets are available here).

You may use this collet chuck on 3/4"-10 or 3/4"-16 lathe spindles with an adapter available from Penn State Industries (click here to view the adapter).  This adapter will allow you to adapt your 3/4" - 10 spindle to fit a 1"-8 Collet Chuck.  There is also an adapter available for 3/4"-16 spindles which can make your collet chuck fit more than one lathe.

The Beall collet system, adapted from metal working technology, is designed to hold small parts safely and accurately in a wood lathe without marring. These collets hold wood so securely that the included spanner wrenches are usually unnecessary (but recommended when using the chuck to hold tooling such as mandrels or drills). In addition to holding wood stock for turning, the system is useful for mounting mandrels, holding kegs by the tenons, small shop-made face plates, metal turning blanks and small jam chucks. Collets have a range of about .040(forty thousandths), or about 1/32".

The kit comes with the collet chuck body, collet nut, 5 piece collet set, and matching spanner wrench set.  The chuck only is the same as the kit, less the 5 collets.

IMPORTANT:  Be sure to install the collet into the collet nut before installing the nut/collet assembly into the chuck body!

Instructions (click here)

The collet chuck body is made in the USA! The collet nut and spanner wrench is imported.  Collets are made in various countries including China (we have tried to find a US manufacturer, but have not been able to find one yet).

1-1/4" - 8 and 1-1/2" - 8 threaded collet chucks are available by special order.  Please email us for availability and pricing.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Tags: BCC1-8,
Powered By OpenCart
WEBFoot Custom Calls © 2021
Warning: file_put_contents() [function.file-put-contents]: Only 0 of 550 bytes written, possibly out of free disk space in /usr/local/4admin/apache/vhosts/ on line 73