MVS Mandrel - 5/8"

MVS Mandrel - 5/8"
Brand: WEBFoot Custom Calls
Product Code: MVS625
Reward Points: 0
Quantity Available: 7
Price: $73.00

Available Options


* Holder Option:

Qty:   Add to Cart
   - OR -   

Instruction Manual - Click Here

-  If you are purchasing the Tapered Shank Holder - PLEASE be sure to check your taper size on your lathe before purchasing the holder with this mandrel.  #1 Morse taper is ≈.475" at the large diameter side of the taper.  #2 Morse Taper is ≈.700" at the large diameter side of the taper.  Tapers are NOT interchangable without adapter sockets.  We have seen many of the import lathes with incorrect taper specifications in the manual (ie Manual says #1 MT, but the machine actually has a #2MT) - so be sure to check before you order. 

-  The taper holder for the MVS & PLS is ONLY available in #2 Morse Taper.  To the best of our searching, there is not a #1MT holder made, therefore the only way to use the PLS on a #1MT lathe, is to get a collet chuck and get the PLS mandrel without a holder.

-  This mandrel is NOT for use without the tail stock.  Injury or death could result from improper use.  A piece of steel shooting out of, or bending on the lathe at high RPM is a recipe for disaster.

-  This mandrel requires a very accurate bore in the blank.  It is STRONGLY recommended that you drill the blank 1/64" undersize, and then use a chucking reamer to open up the bore.  A boring bar used on a metal lathe is also a very good alternative.  Your bore needs to be .6255" - .627" to work properly with the pin locking function, or you will need to shim up the locking pin with tape, mylar, or shim stock.

Image above shown with optional holder.

WFCC's Standard Straight Rod MVS Mandrel (Most Versitile System) with No. 2 Morse Taper holder in 5/8" (.625") diameter.  Custom sizes are available, contact us for more information and pricing on custom specs.  Below surface cuts are included with spacing for 2.75" to 3.8" long barrels, for total call sanding access and access for bell-mouthing the mouth-piece with a very narrow scraper (.050" wide - usually made from old files). Easily works almost all duck and goose call blanks with a single diameter bore, any wall thickness, and is the most versatile of the WEBFoot Mandrel Family.  Crush style mounting requires the blank to be at least 1/2" longer than the finished call.

Also available without the holder for you all with a collet chuck!  Choose the "Rod Only" option from the drop down above.  Shank is .625" (5/8")

The MVS mandrel is more of an "intermediate to advanced" call makers mandrel.  To use the pin lock portion the blank must be bored accurately to function properly.  It is recommended that one drills undersize, and then finishes the bore to size with a 5/8" chucking reamer.

"L" Style allen wrench included with the #2MT Holder.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Tags: MVS625,
Powered By OpenCart
WEBFoot Custom Calls © 2019